baffles

Total: 2773.0 hours
Baffles: 73.0 hours

These baffles took a lot longer than I expected based on the reported times from other builders – about twice as long. I’m not sure why. I had no particular problems or serious time consuming errors. I did put things on and off a great number of times making very small cuts and adjustments each time. That might explain some of it. Or maybe I just work a lot slower than most.

As mentioned, no serious problems. More details in the pictures.

A note about the rubber baffle material. There is no guidance in the plans about how much to overlap or how much should stick up above the top baffle edges so I asked Van’s. They indicated with a consistent 1/2 inch gap between the top baffle edge and the top cowl (as I have), the material should go 3/4 inches down, 1/2 inch overlap from section to section and 2 inches above the top. They said this “usually works pretty well.” I went 1″ down, 1″ overlap and 2″ above the top edge. … Just gave a little more tolerance I felt, in case of an error somewhere.

 

Comments are closed.